Přejít na obsah
  • Vytvořit účet
  • 0

flashka nereaguje

Arcane

Otázku položil Arcane,

 Share

Otázka

26 odpovědí na tuto otázku

Recommended Posts

  • 0
JerRry Newbie

JerRry

Odesláno
Odesláno

Protože mac je mac, už jsem díky macos zachránil pár flashek, které nešli naformátovat, nebo zobrazovali nulovou velikost či se ani neobjevily.

Třeba to v tom linuxu nějak jde, ale já to v něm nikdy nedělal, používám ho jen na nastavování a telnetění.

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Lentilek2 Newbie

Lentilek2

Odesláno
Odesláno

Taky mám W7 a 16GB flashku,jednou jsem ji strčil do sestřineho kompu a kopirval ji tam filmy někd v polovině se to seklo počítač jí vůbec nedetekoval,tak jsem si ji vzal.Skošel jsem to na 3 dalších kompech(W7,Wvista,WXP)a všude mi to psalo,že to chce zformátovat,tak jsem to všude zkoušel,ale vždy se mi to seklo pak jsem zkusil Panasonic SD formatter (prý je na to nejlepší,ikdyž je na SDčka)a nešlo dát tlačítko format,tak jsem to vypnul,znova zapnul a fungovalo,formatovani trvalo asi 15minut,ale dnes je vše OK,ta ho můžeš zkusit.Stahuj:

zde nebo

zde

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Arcane Newbie

Arcane

Odesláno
  • Autor
Odesláno

v linuxu se mi objeví v Počítači, ale nejde s ní nic dělat, nejde přesunut, naformátovat, přejmenovat, nic...dokonce nemá ani sdx označení. Zkusil jsem si stáhnout GParted do GNOME linuxu a tam jsem ji neměl na výběr pro formát, ačkoliv graficky těch 8Gb v liště zaznamenanejch bylo a dole v seznamu taky..ale zase, žádná úprava, žádnej zásah nebyl možnej, formát, kontrola výonu, prostě nic..ani unmountnout nešla

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Dark_user Newbie

Dark_user

Odesláno
Odesláno

V tom linuxu musí mít nějaké označení v dev... to stačí zjistit a pak jen "fdisk /dev/***"; zobrazit rozvržení oddnílů "p"; odstarnit oddíl 1 "d" "1"; odstarnit oddíl 2 "d" "2"...; vytvořit nový oddíl "n" "p" "1" "enter" "enter"; ukoncit fdisk "w"; pak už ho stačí jen naformatovat "mke2fs /dev/***1".

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Arcane Newbie

Arcane

Odesláno
  • Autor
Odesláno

no a do něj se dostanu jak? přes systém nahoře a najít terminál? :D zatim ten linux znova instaluju, už jsem to včera vzdal a dal pryč :P

ted jsem na tu flashku koukal když jsem se jí snažil přejmenovat a je tam napsáno že to nejde a byla označená jako sdb

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Arcane Newbie

Arcane

Odesláno
  • Autor
Odesláno

hlásí mi to trojana :dozey: musel jsem si stáhnout nějakou normální verzi ze stahuj.cz

nějak jsem nepochopil jak se s tim pracuje....

používám w7 a nezdá se že by komunikoval jak v kompatibilnim režimu tak normal...prostě to spustim, nic to nerozpozná, mám tam sice v tabulce myš v USB a tu flasku, ale nejde format, nic, vše zašedlý, nejde to ani u externího HDD

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
hojoko Newbie

hojoko

Odesláno
Odesláno

jednou v minulosti jsem to taky řešil tak že jsem tam šoupnul instalačku a dal reinstalaci,na tvorbě oddílů jse mi zobrazila i flaska......

......tak jsem jí zformátoval FAT a přerušil další akci,pak mi fachala dál.

Co příkazovej řádek...C:\ format x

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Anonymous_ Newbie

Anonymous_

Odesláno
Odesláno

pripoj flashku a odpoj flashku a hod sem vypis z dmesg (dmesg > /tmp/dmesg.log ... pak v /tmp najdes soubor dmesg.log a v nem ten vypis)

pak dle toho, jak ti ji system (ne)oznacil je mozne s tim neco dale delat - napr. ji zkusit nasilne prepsat pres dd if=/dev/zero of=/dev/sd* bs=512 count=2;

Ty kecy s macem mne dostavaji ROFLMAO.. Mac bezi na Unixovem systemu, respektive je (net)BSD based, takze pokud to nepojede na linuxu, tak na macu take ne.. Mac neni zazracny, je to jen Linux s hezkym a upravenym kabatkem.

hojoko: Windows si s timhle asi tezko poradi...

Odkaz ke komentáři
Sdílet na ostatní stránky
  • 0
Arcane Newbie

Arcane

Odesláno
  • Autor
Odesláno

tak tady je ten log

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.32-23-generic-pae (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11 09:26:55 UTC 2010 (Ubuntu 2.6.32-23.37-generic-pae 2.6.32.15+drm33.5)

[ 0.000000] KERNEL supported cpus:

[ 0.000000] Intel GenuineIntel

[ 0.000000] AMD AuthenticAMD

[ 0.000000] NSC Geode by NSC

[ 0.000000] Cyrix CyrixInstead

[ 0.000000] Centaur CentaurHauls

[ 0.000000] Transmeta GenuineTMx86

[ 0.000000] Transmeta TransmetaCPU

[ 0.000000] UMC UMC UMC UMC

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)

[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[ 0.000000] DMI 2.3 present.

[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-C7FFF write-protect

[ 0.000000] C8000-EFFFF uncachable

[ 0.000000] F0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back

[ 0.000000] 1 disabled

[ 0.000000] 2 disabled

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)

[ 0.000000] Scanning 1 areas for low memory corruption

[ 0.000000] modified physical RAM map:

[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)

[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)

[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)

[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)

[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)

[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)

[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)

[ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved)

[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)

[ 0.000000] initial memory mapped : 0 - 00e00000

[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] 0000000000 - 0000200000 page 4k

[ 0.000000] 0000200000 - 0037800000 page 2M

[ 0.000000] 0037800000 - 00379fe000 page 4k

[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000

[ 0.000000] RAMDISK: 2f895000 - 30033163

[ 0.000000] ACPI: RSDP 000f6c00 00014 (v00 Nvidia)

[ 0.000000] ACPI: RSDT 3fff3000 00034 (v01 DELL QA09 42302E31 AWRD 01010101)

[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)

[ 0.000000] ACPI: DSDT 3fff30c0 04BD0 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000C)

[ 0.000000] ACPI: FACS 3fff0000 00040

[ 0.000000] ACPI: MCFG 3fff7d40 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)

[ 0.000000] ACPI: APIC 3fff7cc0 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)

[ 0.000000] ACPI: SLIC 3fff7d7c 00176 (v01 DELL QA09 42302E31 NVDA 0100000E)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 133MB HIGHMEM available.

[ 0.000000] 889MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 379fe000

[ 0.000000] low ram: 0 - 379fe000

[ 0.000000] node 0 low ram: 00000000 - 379fe000

[ 0.000000] node 0 bootmap 00009000 - 0000ff40

[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]

[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]

[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]

[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]

[ 0.000000] #3 [0000100000 - 00009337f8] TEXT DATA BSS ==> [0000100000 - 00009337f8]

[ 0.000000] #4 [002f895000 - 0030033163] RAMDISK ==> [002f895000 - 0030033163]

[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]

[ 0.000000] #6 [0000934000 - 000093b08e] BRK ==> [0000934000 - 000093b08e]

[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]

[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]

[ 0.000000] found SMP MP-table at [c00f5280] f5280

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000000 -> 0x00001000

[ 0.000000] Normal 0x00001000 -> 0x000379fe

[ 0.000000] HighMem 0x000379fe -> 0x0003fff0

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[3] active PFN ranges

[ 0.000000] 0: 0x00000000 -> 0x00000002

[ 0.000000] 0: 0x00000006 -> 0x0000009f

[ 0.000000] 0: 0x00000100 -> 0x0003fff0

[ 0.000000] On node 0 totalpages: 262027

[ 0.000000] free_area_init_node: node 0, pgdat c07d6d60, node_mem_map c1001000

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3963 pages, LIFO batch:0

[ 0.000000] Normal zone: 1748 pages used for memmap

[ 0.000000] Normal zone: 221994 pages, LIFO batch:31

[ 0.000000] HighMem zone: 268 pages used for memmap

[ 0.000000] HighMem zone: 34022 pages, LIFO batch:7

[ 0.000000] Using APIC driver default

[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.

[ 0.000000] If you got timer trouble try acpi_use_timer_override

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] ACPI: IRQ14 used by override.

[ 0.000000] ACPI: IRQ15 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 24

[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:90000000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 15 pages/cpu @c1a00000 s39480 r0 d21960 u1048576

[ 0.000000] pcpu-alloc: s39480 r0 d21960 u1048576 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic-pae root=/dev/sda5 loop=/ubuntu/disks/root.disk ro quiet splash

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] allocated 5242560 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fff0)

[ 0.000000] Memory: 1016964k/1048512k available (4829k kernel code, 30520k reserved, 2216k data, 676k init, 137160k highmem)

[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)

[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)

[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)

[ 0.000000] .init : 0xc07e2000 - 0xc088b000 ( 676 kB)

[ 0.000000] .data : 0xc05b776b - 0xc07e17e8 (2216 kB)

[ 0.000000] .text : 0xc0100000 - 0xc05b776b (4829 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] NR_IRQS:2304 nr_irqs:424

[ 0.000000] spurious 8259A interrupt: IRQ7.

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 2211.774 MHz processor.

[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4423.54 BogoMIPS (lpj=8847096)

[ 0.004023] Security Framework initialized

[ 0.004043] AppArmor: AppArmor initialized

[ 0.004050] Mount-cache hash table entries: 512

[ 0.004174] Initializing cgroup subsys ns

[ 0.004177] Initializing cgroup subsys cpuacct

[ 0.004181] Initializing cgroup subsys memory

[ 0.004188] Initializing cgroup subsys devices

[ 0.004190] Initializing cgroup subsys freezer

[ 0.004193] Initializing cgroup subsys net_cls

[ 0.004210] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[ 0.004212] CPU: L2 Cache: 512K (64 bytes/line)

[ 0.004216] mce: CPU supports 5 MCE banks

[ 0.004233] Performance Events: AMD PMU driver.

[ 0.004237] ... version: 0

[ 0.004239] ... bit width: 48

[ 0.004241] ... generic registers: 4

[ 0.004242] ... value mask: 0000ffffffffffff

[ 0.004245] ... max period: 00007fffffffffff

[ 0.004246] ... fixed-purpose events: 0

[ 0.004248] ... event mask: 000000000000000f

[ 0.004252] Checking 'hlt' instruction... OK.

[ 0.020597] SMP alternatives: switching to UP code

[ 0.026694] ACPI: Core revision 20090903

[ 0.033691] ftrace: converting mcount calls to 0f 1f 44 00 00

[ 0.033699] ftrace: allocating 22407 entries in 44 pages

[ 0.036084] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.036392] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1

[ 0.078952] CPU0: AMD Athlon 64 Processor 3500+ stepping 02

[ 0.080001] Brought up 1 CPUs

[ 0.080001] Total of 1 processors activated (4423.54 BogoMIPS).

[ 0.080001] CPU0 attaching NULL sched-domain.

[ 0.080001] devtmpfs: initialized

[ 0.080001] regulator: core version 0.5

[ 0.080001] Time: 0:04:44 Date: 07/13/10

[ 0.080001] NET: Registered protocol family 16

[ 0.080001] EISA bus registered

[ 0.080001] ACPI: bus type pci registered

[ 0.080001] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255

[ 0.080001] PCI: MCFG area at d0000000 reserved in E820

[ 0.080001] PCI: Using MMCONFIG for extended config space

[ 0.080001] PCI: Using configuration type 1 for base access

[ 0.080001] bio: create slab <bio-0> at 0

[ 0.080001] ACPI: EC: Look up EC in DSDT

[ 0.081035] ACPI Warning: Package List length (0x6) larger than NumElements count (0x2), truncated

[ 0.081039] (20090903/dsobject-515)

[ 0.084391] ACPI: Interpreter enabled

[ 0.084400] ACPI: (supports S0 S1 S4 S5)

[ 0.084422] ACPI: Using IOAPIC for interrupt routing

[ 0.090882] ACPI: No dock devices found.

[ 0.090964] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.091063] HPET not enabled in BIOS. You might try hpet=force boot option

[ 0.091079] pci 0000:00:01.1: reg 10 io port: [0xec00-0xec1f]

[ 0.091088] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]

[ 0.091092] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]

[ 0.091102] pci 0000:00:01.1: PME# supported from D3hot D3cold

[ 0.091105] pci 0000:00:01.1: PME# disabled

[ 0.091125] pci 0000:00:02.0: reg 10 32bit mmio: [0xf2102000-0xf2102fff]

[ 0.091143] pci 0000:00:02.0: supports D1 D2

[ 0.091145] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091148] pci 0000:00:02.0: PME# disabled

[ 0.091166] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]

[ 0.091187] pci 0000:00:02.1: supports D1 D2

[ 0.091189] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091192] pci 0000:00:02.1: PME# disabled

[ 0.091214] pci 0000:00:04.0: reg 10 io port: [0xb800-0xb8ff]

[ 0.091218] pci 0000:00:04.0: reg 14 io port: [0xbc00-0xbcff]

[ 0.091222] pci 0000:00:04.0: reg 18 32bit mmio: [0xf2105000-0xf2105fff]

[ 0.091236] pci 0000:00:04.0: supports D1 D2

[ 0.091257] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]

[ 0.091281] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]

[ 0.091285] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]

[ 0.091289] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]

[ 0.091293] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]

[ 0.091296] pci 0000:00:07.0: reg 20 io port: [0xd000-0xd00f]

[ 0.091300] pci 0000:00:07.0: reg 24 32bit mmio: [0xf2100000-0xf2100fff]

[ 0.091323] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]

[ 0.091326] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]

[ 0.091330] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]

[ 0.091334] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]

[ 0.091338] pci 0000:00:08.0: reg 20 io port: [0xe400-0xe40f]

[ 0.091342] pci 0000:00:08.0: reg 24 32bit mmio: [0xf2101000-0xf2101fff]

[ 0.091375] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf2103000-0xf2103fff]

[ 0.091379] pci 0000:00:0a.0: reg 14 io port: [0xe800-0xe807]

[ 0.091395] pci 0000:00:0a.0: supports D1 D2

[ 0.091397] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091400] pci 0000:00:0a.0: PME# disabled

[ 0.091433] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091435] pci 0000:00:0b.0: PME# disabled

[ 0.091469] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091471] pci 0000:00:0c.0: PME# disabled

[ 0.091504] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091507] pci 0000:00:0d.0: PME# disabled

[ 0.091538] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091540] pci 0000:00:0e.0: PME# disabled

[ 0.091637] pci 0000:01:0a.0: reg 10 32bit mmio: [0xf2004000-0xf20047ff]

[ 0.091643] pci 0000:01:0a.0: reg 14 32bit mmio: [0xf2000000-0xf2003fff]

[ 0.091669] pci 0000:01:0a.0: supports D1 D2

[ 0.091671] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot

[ 0.091674] pci 0000:01:0a.0: PME# disabled

[ 0.091694] pci 0000:00:09.0: transparent bridge

[ 0.091697] pci 0000:00:09.0: bridge 32bit mmio: [0xf2000000-0xf20fffff]

[ 0.091729] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]

[ 0.091760] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]

[ 0.091791] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]

[ 0.091815] pci 0000:05:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff]

[ 0.091822] pci 0000:05:00.0: reg 18 64bit mmio: [0xf1000000-0xf100ffff]

[ 0.091827] pci 0000:05:00.0: reg 20 io port: [0xa000-0xa0ff]

[ 0.091834] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]

[ 0.091848] pci 0000:05:00.0: supports D1 D2

[ 0.091872] pci 0000:05:00.1: reg 10 64bit mmio: [0xf1010000-0xf101ffff]

[ 0.091897] pci 0000:05:00.1: supports D1 D2

[ 0.091930] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff]

[ 0.091933] pci 0000:00:0e.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff]

[ 0.091937] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]

[ 0.091947] pci_bus 0000:00: on NUMA node 0

[ 0.091951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.092152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]

[ 0.142071] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.142189] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.142307] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)

[ 0.142423] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.142539] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.142657] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)

[ 0.142777] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.142895] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)

[ 0.143012] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)

[ 0.143128] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.143246] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)

[ 0.143367] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)

[ 0.143482] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.143608] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)

[ 0.143735] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)

[ 0.143861] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.144008] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.

[ 0.144140] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.

[ 0.144271] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0

[ 0.144401] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.

[ 0.144482] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.

[ 0.144620] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0

[ 0.144758] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.

[ 0.144896] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0

[ 0.145033] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0

[ 0.145170] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.

[ 0.145308] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0

[ 0.145448] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0

[ 0.145586] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.

[ 0.145732] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0

[ 0.145877] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0

[ 0.146023] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.

[ 0.146123] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.146125] vgaarb: loaded

[ 0.146224] SCSI subsystem initialized

[ 0.146295] libata version 3.00 loaded.

[ 0.146359] usbcore: registered new interface driver usbfs

[ 0.146371] usbcore: registered new interface driver hub

[ 0.146392] usbcore: registered new device driver usb

[ 0.146499] ACPI: WMI: Mapper loaded

[ 0.146501] PCI: Using ACPI for IRQ routing

[ 0.146626] NetLabel: Initializing

[ 0.146628] NetLabel: domain hash size = 128

[ 0.146630] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.146642] NetLabel: unlabeled traffic allowed by default

[ 0.148250] AppArmor: AppArmor Filesystem Enabled

[ 0.148268] pnp: PnP ACPI init

[ 0.148284] ACPI: bus type pnp registered

[ 0.151813] pnp: PnP ACPI: found 13 devices

[ 0.151815] ACPI: ACPI bus type pnp unregistered

[ 0.151819] PnPBIOS: Disabled by ACPI PNP

[ 0.151830] system 00:01: ioport range 0x1000-0x107f has been reserved

[ 0.151833] system 00:01: ioport range 0x1080-0x10ff has been reserved

[ 0.151835] system 00:01: ioport range 0x1400-0x147f has been reserved

[ 0.151838] system 00:01: ioport range 0x1480-0x14ff has been reserved

[ 0.151841] system 00:01: ioport range 0x1800-0x187f has been reserved

[ 0.151844] system 00:01: ioport range 0x1880-0x18ff has been reserved

[ 0.151849] system 00:02: ioport range 0x4d0-0x4d1 has been reserved

[ 0.151852] system 00:02: ioport range 0x800-0x87f has been reserved

[ 0.151855] system 00:02: ioport range 0x295-0x314 has been reserved

[ 0.151858] system 00:02: ioport range 0x294-0x297 could not be reserved

[ 0.151865] system 00:0b: iomem range 0xd0000000-0xdfffffff has been reserved

[ 0.151870] system 00:0c: iomem range 0xd1800-0xd3fff has been reserved

[ 0.151872] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved

[ 0.151875] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved

[ 0.151878] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved

[ 0.151881] system 00:0c: iomem range 0x3fff0000-0x3fffffff could not be reserved

[ 0.151884] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved

[ 0.151887] system 00:0c: iomem range 0x0-0x9ffff could not be reserved

[ 0.151890] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved

[ 0.151893] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 0.151896] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.186568] Switching to clocksource acpi_pm

[ 0.186679] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01

[ 0.186681] pci 0000:00:09.0: IO window: disabled

[ 0.186685] pci 0000:00:09.0: MEM window: 0xf2000000-0xf20fffff

[ 0.186688] pci 0000:00:09.0: PREFETCH window: disabled

[ 0.186692] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02

[ 0.186695] pci 0000:00:0b.0: IO window: 0x9000-0x9fff

[ 0.186698] pci 0000:00:0b.0: MEM window: disabled

[ 0.186701] pci 0000:00:0b.0: PREFETCH window: disabled

[ 0.186705] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03

[ 0.186708] pci 0000:00:0c.0: IO window: 0x8000-0x8fff

[ 0.186711] pci 0000:00:0c.0: MEM window: disabled

[ 0.186714] pci 0000:00:0c.0: PREFETCH window: disabled

[ 0.186717] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04

[ 0.186720] pci 0000:00:0d.0: IO window: 0x7000-0x7fff

[ 0.186724] pci 0000:00:0d.0: MEM window: disabled

[ 0.186726] pci 0000:00:0d.0: PREFETCH window: disabled

[ 0.186734] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05

[ 0.186737] pci 0000:00:0e.0: IO window: 0xa000-0xafff

[ 0.186740] pci 0000:00:0e.0: MEM window: 0xf0000000-0xf1ffffff

[ 0.186744] pci 0000:00:0e.0: PREFETCH window: 0x000000e0000000-0x000000efffffff

[ 0.186753] pci 0000:00:09.0: setting latency timer to 64

[ 0.186759] pci 0000:00:0b.0: setting latency timer to 64

[ 0.186764] pci 0000:00:0c.0: setting latency timer to 64

[ 0.186769] pci 0000:00:0d.0: setting latency timer to 64

[ 0.186774] pci 0000:00:0e.0: setting latency timer to 64

[ 0.186779] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.186782] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]

[ 0.186785] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf20fffff]

[ 0.186788] pci_bus 0000:01: resource 3 io: [0x00-0xffff]

[ 0.186791] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]

[ 0.186794] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]

[ 0.186797] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff]

[ 0.186800] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff]

[ 0.186803] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]

[ 0.186806] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff]

[ 0.186809] pci_bus 0000:05: resource 2 pref mem [0xe0000000-0xefffffff]

[ 0.186844] NET: Registered protocol family 2

[ 0.186929] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.187244] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.187945] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.187999] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.187999] TCP reno registered

[ 0.187999] NET: Registered protocol family 1

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0b.0: Found disabled HT MSI Mapping

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0b.0: Linking AER extended capability

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0c.0: Found disabled HT MSI Mapping

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0c.0: Linking AER extended capability

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0d.0: Found disabled HT MSI Mapping

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0d.0: Linking AER extended capability

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0e.0: Found disabled HT MSI Mapping

[ 0.187999] pci 0000:00:00.0: Found enabled HT MSI Mapping

[ 0.187999] pci 0000:00:0e.0: Linking AER extended capability

[ 0.187999] pci 0000:05:00.0: Boot video device

[ 0.187999] cpufreq-nforce2: No nForce2 chipset.

[ 0.187999] Scanning for low memory corruption every 60 seconds

[ 0.187999] audit: initializing netlink socket (disabled)

[ 0.187999] type=2000 audit(1278979484.185:1): initialized

[ 0.195888] Trying to unpack rootfs image as initramfs...

[ 0.204285] highmem bounce pool size: 64 pages

[ 0.204294] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 0.212331] VFS: Disk quotas dquot_6.5.2

[ 0.212416] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.212955] fuse init (API version 7.13)

[ 0.213029] msgmni has been set to 1719

[ 0.213208] alg: No test for stdrng (krng)

[ 0.213259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.213262] io scheduler noop registered

[ 0.213264] io scheduler anticipatory registered

[ 0.213265] io scheduler deadline registered

[ 0.213306] io scheduler cfq registered (default)

[ 0.213423] alloc irq_desc for 24 on node -1

[ 0.213426] alloc kstat_irqs on node -1

[ 0.213434] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X

[ 0.213440] pcieport 0000:00:0b.0: setting latency timer to 64

[ 0.213500] alloc irq_desc for 25 on node -1

[ 0.213502] alloc kstat_irqs on node -1

[ 0.213509] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X

[ 0.213514] pcieport 0000:00:0c.0: setting latency timer to 64

[ 0.213571] alloc irq_desc for 26 on node -1

[ 0.213572] alloc kstat_irqs on node -1

[ 0.213577] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X

[ 0.213581] pcieport 0000:00:0d.0: setting latency timer to 64

[ 0.213640] alloc irq_desc for 27 on node -1

[ 0.213642] alloc kstat_irqs on node -1

[ 0.213646] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X

[ 0.213650] pcieport 0000:00:0e.0: setting latency timer to 64

[ 0.213701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.213723] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.213814] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[ 0.213818] ACPI: Power Button [PWRB]

[ 0.213873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[ 0.213875] ACPI: Power Button [PWRF]

[ 0.214322] processor LNXCPU:00: registered as cooling_device0

[ 0.221197] isapnp: Scanning for PnP cards...

[ 0.226817] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.226901] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.226980] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 0.227208] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.228140] brd: module loaded

[ 0.228569] loop: module loaded

[ 0.228650] input: Macintosh mouse button emulation as /devices/virtual/input/input2

[ 0.228840] pata_acpi 0000:00:06.0: setting latency timer to 64

[ 0.229178] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23

[ 0.229182] alloc irq_desc for 23 on node -1

[ 0.229185] alloc kstat_irqs on node -1

[ 0.229193] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23

[ 0.229208] pata_acpi 0000:00:07.0: setting latency timer to 64

[ 0.229215] pata_acpi 0000:00:07.0: PCI INT A disabled

[ 0.229482] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22

[ 0.229485] alloc irq_desc for 22 on node -1

[ 0.229487] alloc kstat_irqs on node -1

[ 0.229492] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22

[ 0.229506] pata_acpi 0000:00:08.0: setting latency timer to 64

[ 0.229513] pata_acpi 0000:00:08.0: PCI INT A disabled

[ 0.229768] Fixed MDIO Bus: probed

[ 0.229801] PPP generic driver version 2.4.2

[ 0.229832] tun: Universal TUN/TAP device driver, 1.6

[ 0.229834] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[ 0.229906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.230122] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21

[ 0.230124] alloc irq_desc for 21 on node -1

[ 0.230126] alloc kstat_irqs on node -1

[ 0.230131] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21

[ 0.230147] ehci_hcd 0000:00:02.1: setting latency timer to 64

[ 0.230149] ehci_hcd 0000:00:02.1: EHCI Host Controller

[ 0.230180] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1

[ 0.230203] ehci_hcd 0000:00:02.1: debug port 1

[ 0.230208] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported

[ 0.230225] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000

[ 0.279635] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00

[ 0.279771] usb usb1: configuration #1 chosen from 1 choice

[ 0.279799] hub 1-0:1.0: USB hub found

[ 0.279809] hub 1-0:1.0: 10 ports detected

[ 0.279875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.280174] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20

[ 0.280179] alloc irq_desc for 20 on node -1

[ 0.280181] alloc kstat_irqs on node -1

[ 0.280189] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20

[ 0.280206] ohci_hcd 0000:00:02.0: setting latency timer to 64

[ 0.280208] ohci_hcd 0000:00:02.0: OHCI Host Controller

[ 0.280243] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2

[ 0.280268] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf2102000

[ 0.369638] usb usb2: configuration #1 chosen from 1 choice

[ 0.369667] hub 2-0:1.0: USB hub found

[ 0.369678] hub 2-0:1.0: 10 ports detected

[ 0.369739] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.369825] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[ 0.369828] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[ 0.370619] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.376265] mice: PS/2 mouse device common for all mice

[ 0.376402] rtc_cmos 00:04: RTC can wake from S4

[ 0.376443] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[ 0.376470] rtc0: alarms up to one year, y3k, 242 bytes nvram

[ 0.376584] device-mapper: uevent: version 1.0.3

[ 0.376686] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

[ 0.376733] device-mapper: multipath: version 1.1.0 loaded

[ 0.376736] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 0.376849] EISA: Probing bus 0 at eisa.0

[ 0.376856] Cannot allocate resource for EISA slot 1

[ 0.376870] Cannot allocate resource for EISA slot 7

[ 0.376872] Cannot allocate resource for EISA slot 8

[ 0.376874] EISA: Detected 0 cards.

[ 0.380358] cpuidle: using governor ladder

[ 0.380362] cpuidle: using governor menu

[ 0.380810] TCP cubic registered

[ 0.380955] NET: Registered protocol family 10

[ 0.381349] lo: Disabled Privacy Extensions

[ 0.381620] NET: Registered protocol family 17

[ 0.381655] powernow-k8: Found 1 AMD Athlon 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)

[ 0.381695] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6

[ 0.381698] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12

[ 0.381736] Using IPI No-Shortcut mode

[ 0.381819] PM: Resume from disk failed.

[ 0.381830] registered taskstats version 1

[ 0.382063] Magic number: 2:491:51

[ 0.382156] rtc_cmos 00:04: setting system clock to 2010-07-13 00:04:44 UTC (1278979484)

[ 0.382160] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 0.382162] EDD information not available.

[ 0.414513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[ 0.590424] Freeing initrd memory: 7800k freed

[ 0.768886] isapnp: No Plug & Play device found

[ 0.768900] Freeing unused kernel memory: 676k freed

[ 0.769420] Write protecting the kernel text: 4832k

[ 0.769471] Write protecting the kernel read-only data: 1880k

[ 0.787181] udev: starting version 151

[ 0.896065] usb 2-10: new low speed USB device using ohci_hcd and address 2

[ 0.935347] pata_amd 0000:00:06.0: version 0.4.1

[ 0.935397] pata_amd 0000:00:06.0: setting latency timer to 64

[ 0.957073] scsi0 : pata_amd

[ 0.971794] scsi1 : pata_amd

[ 0.972450] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14

[ 0.972454] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15

[ 0.972502] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[ 0.972724] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23

[ 0.972730] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23

[ 0.972734] forcedeth 0000:00:0a.0: setting latency timer to 64

[ 0.972777] nv_probe: set workaround bit for reversed mac addr

[ 1.109640] usb 2-10: configuration #1 chosen from 1 choice

[ 1.152262] ata1.00: ATAPI: LITE-ON DVDRW SHM-165P6S, MS0R, max UDMA/66

[ 1.152288] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)

[ 1.152291] ata1.00: limited to UDMA/33 due to 40-wire cable

[ 1.184204] ata1.00: configured for UDMA/33

[ 1.185529] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SHM-165P6S MS0R PQ: 0 ANSI: 5

[ 1.189777] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 1.189781] Uniform CD-ROM driver Revision: 3.20

[ 1.189961] sr 0:0:0:0: Attached scsi CD-ROM sr0

[ 1.190057] sr 0:0:0:0: Attached scsi generic sg0 type 5

[ 1.363422] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18

[ 1.363429] alloc irq_desc for 18 on node -1

[ 1.363431] alloc kstat_irqs on node -1

[ 1.363440] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18

[ 1.364670] usbcore: registered new interface driver hiddev

[ 1.370927] input: Microsoft Microsoft 3-Button Mouse with IntelliEye as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input4

[ 1.371169] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye] on usb-0000:00:02.0-10/input0

[ 1.371201] usbcore: registered new interface driver usbhid

[ 1.371298] usbhid: v2.6:USB HID core driver

[ 1.416059] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f2004000-f20047ff] Max Packet=[4096] IR/IT contexts=[4/8]

[ 1.492977] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:8a:ba:67

[ 1.492982] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3

[ 1.493081] sata_nv 0000:00:07.0: version 3.5

[ 1.493095] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23

[ 1.493147] sata_nv 0000:00:07.0: setting latency timer to 64

[ 1.493451] scsi2 : sata_nv

[ 1.493545] scsi3 : sata_nv

[ 1.493707] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 23

[ 1.493710] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 23

[ 1.493731] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22

[ 1.493771] sata_nv 0000:00:08.0: setting latency timer to 64

[ 1.493873] scsi4 : sata_nv

[ 1.494063] scsi5 : sata_nv

[ 1.494199] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 22

[ 1.494202] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 22

[ 1.804024] ata5: SATA link down (SStatus 0 SControl 300)

[ 1.960035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 2.188105] ata3.00: HPA unlocked: 488395055 -> 488397168, native 488397168

[ 2.188111] ata3.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133

[ 2.188114] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.234342] ata3.00: configured for UDMA/133

[ 2.234438] scsi 2:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5

[ 2.234583] sd 2:0:0:0: Attached scsi generic sg1 type 0

[ 2.234770] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[ 2.234806] sd 2:0:0:0: [sda] Write Protect is off

[ 2.234809] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.234828] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.234941] sda: sda1 sda2 < sda5 >

[ 2.281560] sd 2:0:0:0: [sda] Attached SCSI disk

[ 2.544025] ata4: SATA link down (SStatus 0 SControl 300)

[ 2.688102] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00148556008a61a3]

[ 2.856023] ata6: SATA link down (SStatus 0 SControl 300)

[ 3.380787] EXT4-fs (loop0): INFO: recovery required on readonly filesystem

[ 3.380792] EXT4-fs (loop0): write access will be enabled during recovery

[ 3.476981] EXT4-fs (loop0): recovery complete

[ 3.487206] EXT4-fs (loop0): mounted filesystem with ordered data mode

[ 16.543779] udev: starting version 151

[ 16.613383] lp: driver loaded but no devices found

[ 16.690162] i2c i2c-0: nForce2 SMBus adapter at 0x1c00

[ 16.690183] i2c i2c-1: nForce2 SMBus adapter at 0x1c40

[ 16.907556] parport_pc 00:09: reported by Plug and Play ACPI

[ 16.907598] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[ 16.908146] Linux agpgart interface v0.103

[ 16.989185] lp0: using parport0 (interrupt-driven).

[ 17.078754] ppdev: user-space parallel port driver

[ 17.079055] [drm] Initialized drm 1.1.0 20060810

[ 17.083879] type=1505 audit(1278972301.197:2): operation="profile_load" pid=605 name="/sbin/dhclient3"

[ 17.084181] type=1505 audit(1278972301.201:3): operation="profile_load" pid=605 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 17.084327] type=1505 audit(1278972301.201:4): operation="profile_load" pid=605 name="/usr/lib/connman/scripts/dhclient-script"

[ 17.210236] [drm] radeon defaulting to kernel modesetting.

[ 17.210242] [drm] radeon kernel modesetting enabled.

[ 17.210306] radeon 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18

[ 17.210312] radeon 0000:05:00.0: setting latency timer to 64

[ 17.217280] [drm] radeon: Initializing kernel modesetting.

[ 17.225297] [drm] register mmio base: 0xF1000000

[ 17.225300] [drm] register mmio size: 65536

[ 17.225937] ATOM BIOS: 113

[ 17.226157] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)

[ 17.226181] [drm] Generation 2 PCI interface, using max accessible memory

[ 17.226184] [drm] radeon: VRAM 256M

[ 17.226185] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF

[ 17.226187] [drm] radeon: GTT 512M

[ 17.226189] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF

[ 17.226224] alloc irq_desc for 28 on node -1

[ 17.226226] alloc kstat_irqs on node -1

[ 17.226237] radeon 0000:05:00.0: irq 28 for MSI/MSI-X

[ 17.226241] [drm] radeon: using MSI.

[ 17.226264] [drm] radeon: irq initialized.

[ 17.226398] [drm] Detected VRAM RAM=256M, BAR=256M

[ 17.226403] [drm] RAM width 128bits DDR

[ 17.228770] [TTM] Zone kernel: Available graphics memory: 444452 kiB.

[ 17.228773] [TTM] Zone highmem: Available graphics memory: 513032 kiB.

[ 17.228792] [drm] radeon: 256M of VRAM memory ready

[ 17.228794] [drm] radeon: 512M of GTT memory ready.

[ 17.228807] [drm] GART: num cpu pages 131072, num gpu pages 131072

[ 17.230842] [drm] radeon: 1 quad pipes, 2 z pipes initialized.

[ 17.230893] [drm] PCIE GART of 512M enabled (table at 0x00040000).

[ 17.230905] [drm] radeon: cp idle (0x10000C03)

[ 17.231046] [drm] Loading R500 Microcode

[ 17.231391] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin

[ 17.246245] [drm] radeon: ring at 0x0000000020000000

[ 17.246279] [drm] ring test succeeded in 9 usecs

[ 17.246414] [drm] radeon: ib pool ready.

[ 17.247696] [drm] ib test succeeded in 0 usecs

[ 17.247808] [drm] Default TV standard: PAL

[ 17.247873] [drm] Radeon Display Connectors

[ 17.247875] [drm] Connector 0:

[ 17.247876] [drm] VGA

[ 17.247879] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c

[ 17.247881] [drm] Encoders:

[ 17.247883] [drm] CRT1: INTERNAL_KLDSCP_DAC1

[ 17.247885] [drm] Connector 1:

[ 17.247887] [drm] Composite

[ 17.247888] [drm] Encoders:

[ 17.247890] [drm] TV1: INTERNAL_KLDSCP_DAC2

[ 17.247892] [drm] Connector 2:

[ 17.247893] [drm] DVI-I

[ 17.247895] [drm] HPD1

[ 17.247897] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c

[ 17.247899] [drm] Encoders:

[ 17.247901] [drm] CRT2: INTERNAL_KLDSCP_DAC2

[ 17.247903] [drm] DFP1: INTERNAL_KLDSCP_TMDS1

[ 17.422143] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22

[ 17.422150] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22

[ 17.422186] Intel ICH 0000:00:04.0: setting latency timer to 64

[ 17.572816] [drm] fb mappable at 0xE00C0000

[ 17.572819] [drm] vram apper at 0xE0000000

[ 17.572821] [drm] size 7257600

[ 17.572822] [drm] fb depth is 24

[ 17.572824] [drm] pitch is 6912

[ 17.573763] fb0: radeondrmfb frame buffer device

[ 17.573766] registered panic notifier

[ 17.573772] [drm] Initialized radeon 2.0.0 20080528 for 0000:05:00.0 on minor 0

[ 17.580102] vga16fb: initializing

[ 17.580108] vga16fb: mapped to 0xc00a0000

[ 17.580113] vga16fb: not registering due to another framebuffer present

[ 17.628917] Console: switching to colour frame buffer device 210x65

[ 17.748023] intel8x0_measure_ac97_clock: measured 55758 usecs (2736 samples)

[ 17.748027] intel8x0: clocking to 46954

[ 18.505640] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k

[ 18.683073] type=1505 audit(1278972302.797:5): operation="profile_load" pid=766 name="/usr/share/gdm/guest-session/Xsession"

[ 18.693835] type=1505 audit(1278972302.809:6): operation="profile_replace" pid=767 name="/sbin/dhclient3"

[ 18.694129] type=1505 audit(1278972302.809:7): operation="profile_replace" pid=767 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 18.694281] type=1505 audit(1278972302.809:8): operation="profile_replace" pid=767 name="/usr/lib/connman/scripts/dhclient-script"

[ 18.703370] type=1505 audit(1278972302.817:9): operation="profile_load" pid=769 name="/usr/bin/evince"

[ 18.724164] type=1505 audit(1278972302.841:10): operation="profile_load" pid=769 name="/usr/bin/evince-previewer"

[ 18.738631] type=1505 audit(1278972302.853:11): operation="profile_load" pid=769 name="/usr/bin/evince-thumbnailer"

[ 29.456027] eth0: no IPv6 routers present

[ 58.344204] usb 1-9: new high speed USB device using ehci_hcd and address 3

[ 58.477003] usb 1-9: configuration #1 chosen from 1 choice

[ 58.528735] Initializing USB Mass Storage driver...

[ 58.528842] scsi6 : SCSI emulation for USB Mass Storage devices

[ 58.528989] usbcore: registered new interface driver usb-storage

[ 58.528992] USB Mass Storage support registered.

[ 58.535701] usb-storage: device found at 3

[ 58.535705] usb-storage: waiting for device to settle before scanning

[ 63.532180] usb-storage: device scan complete

[ 63.533916] scsi 6:0:0:0: Direct-Access USBest USB2FlashStorage 0.00 PQ: 0 ANSI: 2

[ 63.535944] sd 6:0:0:0: Attached scsi generic sg2 type 0

[ 63.538651] sd 6:0:0:0: [sdb] Attached SCSI removable disk

[ 74.165855] usb 1-9: USB disconnect, address 3

[ 79.576079] Clocksource tsc unstable (delta = -106949553 ns)

Odkaz ke komentáři
Sdílet na ostatní stránky

Přidej se do diskuze

Můžete přidat přidat příspěvek a zaregistrovat se později. Pokud máte úcet, přihlašte se.

Návštěvník
Odpověď na tuto otázku...

×   Vložili jste obsah s formátováním..   Odstranit formátování

  Only 75 emoji are allowed.

×   Váš odkaz byl automaticky načten a vložen..   Zobrazit jako odkaz

×   Váš předchozí obsah byl obnoven.   Vymazat obsah

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Přejít na seznam otázek
×
×
  • Vytvořit...

Důležitá informace

Tento web používá k poskytování služeb a k analýze návštěvnosti soubory cookies. Více informací naleznete v Zásady ochrany osobních údajů a Pravidla webu

  I accept