greengrasswin

This guide contains two parts: Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). PSP compatible Movie/Video formats: You can save and play movies/videos on your PSP (PlayStationPortable) system in the following file formats: MPEG-4 Simple Profile (AAC) H.264/MPEG-4 AVC Main Profile (CABAC) (AAC) and Baseline Profile (AAC) In this guide we use Cucusoft PSP Video Converter, you can download this software from here for free. http://www.iphone-converter-soft.com/psp/index.htm Part 1: How to rip DVD and convert AVI/WMV/MPEG to PSP 1. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video. If you want to convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM or limewire and YouTube video to PSP MP4 video. Press the second button to open "PSP Video Converter” 2. Click "Open file" to import your video files which you want to convert to PSP video. 3. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie (.mp4), PSP - PSP MPEG-4 Movie (.mp4), MP3 Audio (.mp3). Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. 4. Click "Output" button to chose where you want to put your converted PSP files. 5. Click "Convert" button to convert your video files to PSP format. 6. After conversion, there will be a Dialog window. You can choose "Open output folder to check the output file(s)" to go to the output folder or "launch PSP Video Manager to upload output file(s) to your PSP device" to go to the PSP Video Manager. Part 2: How to transfer video to PlayStation Portable (PSP) 1. When the converting finished, this "Conversion Done" window will pop up. If you want to upload the output file to PSP right now, please choose the second option. The program will load the Cucusoft PSP Manager automaticlly. If you choose the first option, you can upload the file by lunching the Cucusoft PSP Manager Program. 2. Please make sure: A) Your PSP/Memeory Stick is connected to your PC. B) The PSP is power on. C) The PSP is in USB mode. 3. After your PSP connected to pc, you will see the following right UI. Or you can run Cucusoft PSP Video Suite, and click the third button on the main window to go PSP Video Manager. 4. Choose the video you converted, click the "upload to psp" button. The file will be transferred to psp. Ok, now you have converted your video files to PSP video and uploaded PSP video into PSP successfully. DVD to PSP

This guide contains two parts: Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). PSP compatible Movie/Video formats: You can save and play movies/videos on your PSP (PlayStationPortable) system in the following file formats: MPEG-4 Simple Profile (AAC) H.264/MPEG-4 AVC Main Profile (CABAC) (AAC) and Baseline Profile (AAC) In this guide we use Cucusoft PSP Video Converter, you can download this software from here for free. http://www.iphone-converter-soft.com/psp/index.htm Part 1: How to rip DVD and convert AVI/WMV/MPEG to PSP 1. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video. If you want to convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM or limewire and YouTube video to PSP MP4 video. Press the second button to open "PSP Video Converter” 2. Click "Open file" to import your video files which you want to convert to PSP video. 3. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie (.mp4), PSP - PSP MPEG-4 Movie (.mp4), MP3 Audio (.mp3). Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. 4. Click "Output" button to chose where you want to put your converted PSP files. 5. Click "Convert" button to convert your video files to PSP format. 6. After conversion, there will be a Dialog window. You can choose "Open output folder to check the output file(s)" to go to the output folder or "launch PSP Video Manager to upload output file(s) to your PSP device" to go to the PSP Video Manager. Part 2: How to transfer video to PlayStation Portable (PSP) 1. When the converting finished, this "Conversion Done" window will pop up. If you want to upload the output file to PSP right now, please choose the second option. The program will load the Cucusoft PSP Manager automaticlly. If you choose the first option, you can upload the file by lunching the Cucusoft PSP Manager Program. 2. Please make sure: A) Your PSP/Memeory Stick is connected to your PC. B) The PSP is power on. C) The PSP is in USB mode. 3. After your PSP connected to pc, you will see the following right UI. Or you can run Cucusoft PSP Video Suite, and click the third button on the main window to go PSP Video Manager. 4. Choose the video you converted, click the "upload to psp" button. The file will be transferred to psp. Ok, now you have converted your video files to PSP video and uploaded PSP video into PSP successfully. DVD to PSP

When PSP crash into your digital life,do you have problems of ripping DVD movies to PSP with good video and audio quality? iSkysoft DVD to PSP Converter can easily solve the problem with just a few simple clicks. To rip your DVD with iSkysoft DVD to PSP Converter, you can just following the steps below: Step 1: Download iSkysoft DVD to PSP Converter and install the program. Click the Load DVD button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, select the VIDEO_TS folder and click OK. Or, click the Load IFO button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, open the VIDEO_TS folder, select all the IFO files and click OK. After you add your movie, you can choose any titles or chapters that you want to convert by ticking the check boxes before them. Step 2: Output Settings At the bottom of the main window, you can name the output file for the current title/chapter, and select a subtitle to put on your movie, select an audio track. Then finish all the settings including selecting an output format, clicking the Settings button to set the video and audio encoding settings, choose if to merge the selected titles or chapters into one file, and set an output directory to save the output files. Step 3: Start Conversion After setting the output settings, you can just click the Convert button to start converting your Movie. You can choose to shut down your computer or open the output folder after conversion so you don’t have to sit before your computer waiting for the conversion to finish. Advanced Options If you want to edit your movie before converting it, iSkysoft DVD to PSP Converter for Windows provides your with various powerful functions including: 1. Trim DVD Title or Chapter If you want to capture a clip from the current title/chapter, you can click the Trim button to open the Trim window and trim the current title or chapter by dragging the Start Time slider to set the start time, and dragging the End Time slider to set the finish time. 2. Crop DVD Video If you want to remove the black edges or just convert an area from your movie video, you can click the Crop button to crop the video of the current title or chapter. You can specify an area either by dragging the frame around the video or setting the crop values: Top, Button, Left and Right. 3. Video Effect If you want to adjust the video effect of your movie, you can click the Effect button and drag each effect adjustment slider to set the video brightness, contrast, saturation and video volume. You can also choose a special effect from the Effect drop-down list to apply to your movie. DVD to PSP

1.PSP Wizard When you run DVD to PSP for the first time, it will prompt you for the drive letter of your PSP, whilst it is connected to your PC. If your Sony PSP is not connected to your PC at the moment or is not available, you can simply choose a hard drive, such as C:\ When you have chosen your drive letter, press Apply. 2. Open a DVD From the main toolbar, press the Open DVD button, or you may select File-> Open DVD from the main menu You will now be asked to provide the location of your DVD you wish to encode. Press OK, when you are happy with your selection. DVD to PSP will now populate the view with the main contents of the DVD. This can take a few seconds to complete, depending on the speed of your CPU and DVD-ROM drive. You should have something similar to the image shown below, obviously your Title and Chapter layout will look different to the one shown. 3. Choose your Output File Type OK, on the right of the window, you will see the Output options. This allows you to choose the type of file you wish to convert the DVD to. H.264 H.264, also known as MPEG-4 AVC (Advanced Video Coding), is a video compression standard that offers significantly greater compression than its predecessors. The standard is expected to offer up to twice the compression of the current MPEG-4 ASP (Advanced Simple Profile), in addition to improvements in perceptual quality. The H.264 standard can provide DVD-quality video at under 1 Mbps, and is considered promising for full-motion video over wireless, satellite, and ADSL Internet connections. MPEG4 MPEG4 is the name of a popular new video codec being developed as an open source project by volunteer programmers from all over the world. The format was created to offer a free alternative to other commercial video codecs, and despite being open source its quality and efficiency has made it one of the most popular video codecs online. While MPEG4 still isn't as widely used as DivX, playback of MPEG4 movies is usually supported in new DVD players nowadays.The MPEG4 codec makes it possible to compress a full-length DVD-quality movie enough to fit on a single CD (might require 2 CDs depending on the length of the movie), while still maintaining the original image quality. Despite the fact that MPEG4 movies offer higher quality video at smaller file sizes they take less time to encode than MPEG-2 due to the incredible compression technology. The video is usually combined with MP3 or AC3 audio to enable both high quality video and audio. These factors and the fact that the codec is distributed for free has contributed to the success of the format. 4. Choose your options Video Settings: Bitrate (k/bits), Video Size,Frame Rate. Adv. Video Settings:Filter---Allows you to specify a De-Interlace or Inverse Telecine filter to the output file Audio Settings: Bitrate, Sampling, Channels, Normalize Sound , Adjust Volume General Settings. CPU Priority This option lets you adjust how much time your PC will spend encoding files. Low : Only encode when the CPU is idle Norm : Default CPU time, High : Use as much CPU cycles as possible. Warning: Choosing this option, may render your computer into a non-responding state until the encoding has finished. Use with care Split By Title - Your output will be a single file per Title By Chapter - Selecting this, will put the software into 'Chapters' mode, where you can select the chapters you wish to encode into their own files Shutdown When Finished This option, if ticked, will automatically shutdown your PC after the DVD to PSP conversion has finished. This is very useful, if you want start your DVD conversion last thing at night, but don't want your PC to remain switched on for hours after the process has finished. 5. Providing Track Information As you will see, the default name for your files has been generated with the format of - Title 01 etc... You may edit these names, simply by clicking the field and changing the name else. 6. Ready to Rip OK, we are ready to go. Press the Start Ripping button to begin the process - The encoding process and will report the progress on the current process You may abort the encoding process at any time, by pressing the Abort button, t his will stop the encoding process. DVD to PSP

1.PSP Wizard When you run DVD to PSP for the first time, it will prompt you for the drive letter of your PSP, whilst it is connected to your PC. If your Sony PSP is not connected to your PC at the moment or is not available, you can simply choose a hard drive, such as C:\ When you have chosen your drive letter, press Apply. 2. Open a DVD From the main toolbar, press the Open DVD button, or you may select File-> Open DVD from the main menu You will now be asked to provide the location of your DVD you wish to encode. Press OK, when you are happy with your selection. DVD to PSP will now populate the view with the main contents of the DVD. This can take a few seconds to complete, depending on the speed of your CPU and DVD-ROM drive. You should have something similar to the image shown below, obviously your Title and Chapter layout will look different to the one shown. 3. Choose your Output File Type OK, on the right of the window, you will see the Output options. This allows you to choose the type of file you wish to convert the DVD to. H.264 H.264, also known as MPEG-4 AVC (Advanced Video Coding), is a video compression standard that offers significantly greater compression than its predecessors. The standard is expected to offer up to twice the compression of the current MPEG-4 ASP (Advanced Simple Profile), in addition to improvements in perceptual quality. The H.264 standard can provide DVD-quality video at under 1 Mbps, and is considered promising for full-motion video over wireless, satellite, and ADSL Internet connections. MPEG4 MPEG4 is the name of a popular new video codec being developed as an open source project by volunteer programmers from all over the world. The format was created to offer a free alternative to other commercial video codecs, and despite being open source its quality and efficiency has made it one of the most popular video codecs online. While MPEG4 still isn't as widely used as DivX, playback of MPEG4 movies is usually supported in new DVD players nowadays.The MPEG4 codec makes it possible to compress a full-length DVD-quality movie enough to fit on a single CD (might require 2 CDs depending on the length of the movie), while still maintaining the original image quality. Despite the fact that MPEG4 movies offer higher quality video at smaller file sizes they take less time to encode than MPEG-2 due to the incredible compression technology. The video is usually combined with MP3 or AC3 audio to enable both high quality video and audio. These factors and the fact that the codec is distributed for free has contributed to the success of the format. 4. Choose your options Video Settings: Bitrate (k/bits), Video Size,Frame Rate. Adv. Video Settings:Filter---Allows you to specify a De-Interlace or Inverse Telecine filter to the output file Audio Settings: Bitrate, Sampling, Channels, Normalize Sound , Adjust Volume General Settings. CPU Priority This option lets you adjust how much time your PC will spend encoding files. Low : Only encode when the CPU is idle Norm : Default CPU time, High : Use as much CPU cycles as possible. Warning: Choosing this option, may render your computer into a non-responding state until the encoding has finished. Use with care Split By Title - Your output will be a single file per Title By Chapter - Selecting this, will put the software into 'Chapters' mode, where you can select the chapters you wish to encode into their own files Shutdown When Finished This option, if ticked, will automatically shutdown your PC after the DVD to PSP conversion has finished. This is very useful, if you want start your DVD conversion last thing at night, but don't want your PC to remain switched on for hours after the process has finished. 5. Providing Track Information As you will see, the default name for your files has been generated with the format of - Title 01 etc... You may edit these names, simply by clicking the field and changing the name else. 6. Ready to Rip OK, we are ready to go. Press the Start Ripping button to begin the process - The encoding process and will report the progress on the current process You may abort the encoding process at any time, by pressing the Abort button, t his will stop the encoding process. DVD to PSP

This guide contains two parts: Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). PSP compatible Movie/Video formats: You can save and play movies/videos on your PSP (PlayStationPortable) system in the following file formats: MPEG-4 Simple Profile (AAC) H.264/MPEG-4 AVC Main Profile (CABAC) (AAC) and Baseline Profile (AAC) In this guide we use Cucusoft PSP Video Converter Suite, you can download this software from here for free. http://www.iphone-converter-soft.com/psp/index.htm Part 1: How to rip DVD and convert AVI/WMV/MPEG to PSP 1. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video. If you want to convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM or limewire and YouTube video to PSP MP4 video. Press the second button to open "PSP Video Converter” 2. Click "Open file" to import your video files which you want to convert to PSP video. 3. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie (.mp4), PSP - PSP MPEG-4 Movie (.mp4), MP3 Audio (.mp3). Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. 4. Click "Output" button to chose where you want to put your converted PSP files. 5. Click "Convert" button to convert your video files to PSP format. 6. After conversion, there will be a Dialog window. You can choose "Open output folder to check the output file(s)" to go to the output folder or "launch PSP Video Manager to upload output file(s) to your PSP device" to go to the PSP Video Manager. Part 2: How to transfer video to PlayStation Portable (PSP) 1. When the converting finished, this "Conversion Done" window will pop up. If you want to upload the output file to PSP right now, please choose the second option. The program will load the Cucusoft PSP Manager automaticlly. If you choose the first option, you can upload the file by lunching the Cucusoft PSP Manager Program. 2. Please make sure: A) Your PSP/Memeory Stick is connected to your PC. B) The PSP is power on. C) The PSP is in USB mode. 3. After your PSP connected to pc, you will see the following right UI. Or you can run Cucusoft PSP Video Suite, and click the third button on the main window to go PSP Video Manager. 4. Choose the video you converted, click the "upload to psp" button. The file will be transferred to psp. Ok, now you have converted your video files to PSP video and uploaded PSP video into PSP successfully. Best PSP Video Converter software