Izmail360

Nejnovejsi :)

Muzes maximalne tak zjistit, jestli mas novej FW 1.51, takze ze zkusis nove hry.

1) na flash BenQ ti staci pouze sata radic 2) co jsem drive daval samsungy, tak spousta jich odeslo, u BenQ zatim ani jeden, to s tou ochranou proti BANU netvrdim ja, ale autori iXtreme FW, vsak si precti jeji readme, tam to popisuji, tady na foru jsem to taky uz jendou postoval v českém obchodě nevím, kde bys ji sehnal, ja to mam ze zahranici 3)ano 4)u flashe BenQ se do mechaniky lezt nemusi ale porad zapominas na jednu hlavni vec a to na vycteni klice z puvodni Liteon mechaniky, na to uz prevodnik potrebujes, kazdopadne da se udelat a vyjde te to cca na 100 kc kdyz moc

1) samsung je trosku jina nez BenQ 2) BenQ se kopit da, mam jeste 2 posledni a nevyuziju je, 3)ano 4) nejak nechapu, co jsi tim myslel

Kontroloval jsi hru pres ABGX360 ?

Takhle, FW 1.6 ma mit navic to, že budete pres mechaniku moc delat zalozni kopie v PC. To vetsina (kdo stahuje z netu, tak nikdo) stejne potrebovat nebude, tak si myslim, ze je zbytecny cekat treba i nekolik mesicu, ale nikomu to nerozmlouvam, je to kazdeho vec :)

Tady mas mapu flasheru, http://console-forum.net/showthread.php?t=48428

i na 79 chip neni potreba :)

na xbox potrebujes torx 10 a 8 (pokud je 8 vymleta tak to vem 9)

1,51 ma navic jen podporu 3 wave.

Vzhledem k tomu, ze se BANy udeluji ve vlnach, tak ho driv ci pozdeji pravdepodobne dostanes, cimz prijdes i o zaruku, ze vam to za to stoji, to nechapu.

Takze zaprve, nepouzivej Jungle Flasher, je to BETA a umi to delat vic skody nez uzitku. Mechaniku zkus smazat znovu pres doshflash (doporucuji dosovou verzi), kde napises: "doshflash e 4400 1 a0 1 4 d8 0" to 4400 je cislo portu, zbytek opis tak, jak jsem psal, u novych verzi doshflash staci napsat "doshflash" a pak tukat podle toho, co to pise :)

¨Jasny, urcite kup, obraz na nem bude peknej o tom zadna. To je asi tak, jak kdyz mas nadhernej obraz na 19' monitoru a pak u kamosa uvidis plasmu, tak ti taky pripada ta 19' hnusna :D. Ale jestli mas na monitoru i DVI nebo HDMI, tak jdi radsi do toho, ono to vyjde i levnej.

jake zuby ? :D co ty s tim maji co spolecneho? hadat se muzes, ja vim, sve, bavil jsem se s jednim doktorandem u nas na skole, ktery testoval rozdily VGA a HDMI (sice ne u xboxu, ale to je uplne jedno) a rikal, ze co se tyce kvality rozdil je dalsi vec je, ze na 19' monitoru jsem rozdil poznal take - HDMI obyc kabel a VGA orig od MS

shai_tan: :D blbost to neni, hadat se nebudu, ale rozdil je rozeznatelny uz na 19' LCD. Hold digital je digital.

Ve velkem rozliseni to pujde, ale ve srovnani s HDMI nebo DVI je obraz neostry.

Heady: pokud hrajes na live, tak fix nic neresi, je to riziko banu jak svina

TO je prave problem, nikomu se nic nechce hledat a proto pak admini zuri, kdyz se nekdo pta na neco porad dokola. NE, jde to jen s 1.51 a non stealth firmwarem.

Pro vsechno

iXtreme 1.51 - vyzkouseno, zacinam provadet update :) (300 kc), slape jak hodinky

zapis do Sam. mtkflash w /m /sata firm.bin Jinak to, co pises je klasika, BenQ staci zkalibrovat a vsechno bude ok.

[02:10:06] <+c4eva> ix1.51 for sammy,benq,liteon under going initial testing, full wave 3 support! [02:13:53] <+c4eva> was quicker to do 1.51 now, then a 1.6 after this, to get the games booting again on ix! [02:16:23] <+c4eva> working on hitachi ix1.51 now, end of week hopefully! iXtreme 1.51 for ALL 4 DRIVE TYPES. iXtreme 1.6 will shorty follow 1.51. OK... looks like there is some confusion out there I will try to clear up. 1. New games are coming with a 3rd wave video partition and iXtreme 1.5 and below WILL NOT BOOT these games with a 3rd wave video partition. 2. Currently, the only way to BOOT these games with the 3rd wave video partition, is to flash your drive with a NON-STEALH FIRMWARE. EXAMPLE = iXtreme 1.41 NON-STEALTH for the BenQ drive. The NON-STEALTH firmware will not do the certain security checks that iXtreme Stealth firmware does. DO NOT GO ON LIVE WITH NON-STEALTH FIRMWARE 3. Question- Will I need this iXtreme 1.6 update? Answer= Yes and No. Current STEALTH firmwares (1.4 and 1.5) are being used on live and haven't seen any problems for awhile. There are a lot of factors that go into how you get banned so I won't go into detail. BUT.. to ensure that you will have the highest protection against banning, it is always smart to go with the MOST CURRENT firmware... which will be iXtreme 1.6. BUT.. There is no guarantee that you won't get banned, having the most current firmware is just a smart idea. + [11:37] <@[X]nWo[X]> i got hooked up yesterday [11:37] <@[X]nWo[X]> to test [11:37] <@[X]nWo[X]> ix151Benq.bin [11:37] <@[X]nWo[X]> should go public soon [11:38] <@[X]nWo[X]> ix151-sam.bin [11:38] <@[X]nWo[X]> works all good Omlouvam se, ze to nevkladam prelozene, ale na to nemam momentalne cas, lets practise english :D

tak co ja pamatuju, tak s prichodem GoW2 prisla i vlna banu

HDMI -DVI pouzivam take, cca 150 kc a zadne duhy nemam, zkus ho u nekoho jineho pak budes vedet:)