Anubis1

Support for LT Plus 3.0 -Lite-on Phat 02510C -Benq 04421C

Ten Easeus musi fungovat. Formatoval jsem v nem 1TB disk na Xbox a slo to.

Dashlaunch Temp Monitor v1.0b - Fixed: Re-Opening options menu now re-loads ALL options :) - Fixed: Random crash when exiting while the app is still working - Fixed: The app now only writes to log if there is new data rather then once each second - Changed: Moved RAW data to be below temperatures instead of above - Fixed: Middle temps are now shown in orange properly when it's between good/bad

2. kdyz budou nove hry casem vyzadovat aktualizaci DB, tak ji budes muset udelat sam (neni to nic extra sloziteho http://console-forum.net/tema/134857-aktualizace-rgh-na-metro-dash-alterantivni-postup-multibuilder) a nebo pokud si na to netroufnes tak ten co ti delal RGH.

Dash Launch v2.28 - added rad.msn.com to weak blocklist - added *bing.net, *msn.com to strong blocklist - added glitch machine detection for xellLaunch to launch on flash xell-1f - added xhttp auth patch for 14699 (thanks Anthony!) - added signin notice dismiss (optionally disabled, only affects 'ok' type dialogs) - added intMu: to installer ini updater - added autoselect shutdown and auto off option for the "hold guide to shutdown" NOTE: that both these options can affect other things that use this type of dialog! - added optional temp broadcaster - added quick python script to cap temp broadcasts to a .csv file Xbox Backup Creator v2.9 Build:0350 Changed - Minor tweaks to Image Browser dialog Changed - AP25 iXtreme LT+ v3.0 method to "Profiling" Changed - Image Browser to better match stand alone app Removed - Convert to SplitVid tool Removed - ISO Tagging feature Fixed - Ripping xgd1 titles Fixed - xgd3 drive response SS details Fixed - Assortment of minor issues Added - Windows 7 Taskbar Progress To patch the median file for LT+ v3.0 Image Tools > select inject > load iso > click AP25 Sector> load median.bin and patch > burn with iHas Driver + BurnerMax Firmware

XNand Healer GUI v0.73 - This release is for small but important change to the build glitch image feature. It's possible for another Multibuilder operation e.g. "build JTAG image with custom smc" to leave an smc.bin file in the Data\my360 folder. The next time xeBuild is invoked by Xnandhealer (or from cmd line) the build would erroneously pick up this smc and cause a bad image build. Now any leftover smc.bin file that may be present in the Data\my360 folder will be removed before building the image, thus ensuring the correct smc is always used.

Mam PS3 fat a je tam OFW 3.15. Mam udlat update na OFW 3.55 a pak tam hodit nejaky CFW 3.55 nebo je jeste nejake lepsi moznost.

FSD 2.2 installer Well here is a new tool from TeamFSD just for you. It allows you to do either a local, or online install of FSD and Dashlaunch. It can be run from either LIVE, DVD, or Extracted (packages included) Live package needs to be copied to Content\0000000000000000 in order to show up in NXE Basically a one stop shop. Run from media of choice, choose where to install, what to install and where to get media (local or internet) and press go. When installing Dashlaunch it will setup the launch on startup for the requested FSD install dir

ano JTAG/RGH

Ne kupovane to neni :-)

Tak jsem kus odehral a musim rict ze je to slusny pokracovani. Kdo hral predchozi, tak si urcite tohle nemuze nechat ujit. Hlavne grafika je propracovana, mozna nekdo rekne ze je to hodne barevny, ale me se to libi.

V Xexmenu zmackni parkrat RB dokud se tam nezobrazi ty teploty a ve FSD si to musis nastavit v settings/general settings/show statusbar on startup tam to muzes dat natvrdo pri startu a nebo staci zmacknout pravej analog a to ti zustane jen do restartu FSD.

Musis mit spusteny FSD nebo Xexmenu jinde to neuvydis.

Aha takze tady se jedna o problem spojeny pouze s Dashlaunch. Proto me to chodilo normalne bez prejmenovani.

Pokud nemas original NAND od toho kdo ti to delal, tak jedine vycist to co tam ted mas timto programem NAND Flasher 360 for XBOX 360, pote upravit a zase tim stejnym programem to tam vlozit.

Aha takze nektere Xboxy s tim maji problem, ktery se vyresi tim prejmenovanim.

Vyslo Duke Nukem Forever - The Doctor Who Cloned Me DLC 1.74GB rar

Z jakyho duvodu prejmenovavat na $$ystemUpdate? To nejak nechapu!!!!! Vzdyt se to dela normalne z toho $Systemupdate.

Tak takto ti budou fungovat jen DLC jelikoz 2DVD u Forza 4 je v podstate DLC a nic jineho. Jine hry to maji s dalsima diskama jinak. Musel se pouzit swap a pak to slapalo take.

Sehnal jsem tohodle vodnika http://pctuning.tyden.cz/hardware/skrine-zdroje-chladice/3927-aqcool_3000p-instantni_vodnik a pokusim se ho nabastlit k Xboxu. Vyrobim k nemu akorat blok pro CPU a GPU zaroven. Predstavuju si to asi nejak takhle http://watercooling.50webs.com/1/

Da se nekde sehnat ta hmota co je ze spodu desky Xboxu mezi pametma a plechovou skatulej.

FreeBOOT ToolBox Maker V2.9 - The support of the kernel thanks xeBuild 14699. - Added patches Dashlaunch 2.27 - Update build.py in 1.1 (now compatible with the Falcons) - Added support for CB 5771 and 6751 - The fcrt.bin is now injected into freeBOOT (If you have a 1175 drive, you must have a source containing the nand fcrt.bin, which is not the case with former freeBOOT generated by my tool.) FreeBOOT ToolBox Maker V2.9.1

K tomu bodu 2. jen doplnim, ze je na to programek kterej spustis v Xboxu, on projede disk a hry ktery tam jsou nainstalovany upravi ze jdou bez DVD, ale zaboha si ted nevzpomenu jak se jmenuje :-(

Xebuild GUI V1.1 - Added: Function to prepare a USB memory stick for updating your console with the AVATAR support (Update downloader) - Fixed: Copying of Cygnos360 V2 SMC now works... - Fixed: Some Xenon SMC's didn't show previous hack properly... works now :D - Fixed: Sometimes the app will recognise your SMC as Cygnos whiles it's JTAG, the app will now show you it's JTAG if it can see that it's JTAG patched aswell instead of fooling you by saying it's a cygnos 360 patch... - Changed: The app no longer asks if you want to clear the log after autosaving, instead it asks if you want to Close the app, Clear the log or just leave the way it is :) - Added: Reading cpukey/ldv from fuse.txt or downloading it from xell now also saves both CPUKey and DVDKey (if available) to keys.txt :) 360 Multi Builder v0.7 - Added a default "launch.ini" to Flash when image is created with Dashlaunch. Button_A=Hdd:\FSD\default.xex , default=Usb:\FSD\default.xex , rest=default - Added the option to auto-build custom "launch.ini" per user preference.

A jaka verze ti tam nakonec jde?