Jump to content

DVD to PSP Quick Start Guide


greengrasswin
 Share

Recommended Posts

1.PSP Wizard

When you run DVD to PSP for the first time, it will prompt you for the drive letter of your PSP, whilst it is connected to your PC.

jestware1.jpg

If your Sony PSP is not connected to your PC at the moment or is not available, you can simply choose a hard drive, such as C:\

When you have chosen your drive letter, press Apply.

2. Open a DVD

From the main toolbar, press the Open DVD button, or you may select File-> Open DVD from the main menu

You will now be asked to provide the location of your DVD you wish to encode.

jestware2.jpg

Press OK, when you are happy with your selection.

DVD to PSP will now populate the view with the main contents of the DVD. This can take a few seconds to complete, depending on the speed of your CPU and DVD-ROM drive.

You should have something similar to the image shown below, obviously your Title and Chapter layout will look different to the one shown.

jestware3.jpg

3. Choose your Output File Type

OK, on the right of the window, you will see the Output options. This allows you to choose the type of file you wish to convert the DVD to.

H.264

H.264, also known as MPEG-4 AVC (Advanced Video Coding), is a video compression standard that offers significantly greater compression than its predecessors. The standard is expected to offer up to twice the compression of the current MPEG-4 ASP (Advanced Simple Profile), in addition to improvements in perceptual quality. The H.264 standard can provide DVD-quality video at under 1 Mbps, and is considered promising for full-motion video over wireless, satellite, and ADSL Internet connections.

MPEG4

MPEG4 is the name of a popular new video codec being developed as an open source project by volunteer programmers from all over the world. The format was created to offer a free alternative to other commercial video codecs, and despite being open source its quality and efficiency has made it one of the most popular video codecs online. While MPEG4 still isn't as widely used as DivX, playback of MPEG4 movies is usually supported in new DVD players nowadays.The MPEG4 codec makes it possible to compress a full-length DVD-quality movie enough to fit on a single CD (might require 2 CDs depending on the length of the movie), while still maintaining the original image quality. Despite the fact that MPEG4 movies offer higher quality video at smaller file sizes they take less time to encode than MPEG-2 due to the incredible compression technology. The video is usually combined with MP3 or AC3 audio to enable both high quality video and audio. These factors and the fact that the codec is distributed for free has contributed to the success of the format.

4. Choose your options

Video Settings: Bitrate (k/bits), Video Size,Frame Rate.

Adv. Video Settings:Filter---Allows you to specify a De-Interlace or Inverse Telecine filter to the output file

Audio Settings: Bitrate, Sampling, Channels, Normalize Sound , Adjust Volume

General Settings.

CPU Priority

This option lets you adjust how much time your PC will spend encoding files.

Low : Only encode when the CPU is idle

Norm : Default CPU time,

High : Use as much CPU cycles as possible. Warning: Choosing this option, may render your computer into a non-responding state until the encoding has finished. Use with care

Split

By Title - Your output will be a single file per Title

By Chapter - Selecting this, will put the software into 'Chapters' mode, where you can select the chapters you wish to encode into their own files

Shutdown When Finished

This option, if ticked, will automatically shutdown your PC after the DVD to PSP conversion has finished. This is very useful, if you want start your DVD conversion last thing at night, but don't want your PC to remain switched on for hours after the process has finished.

5. Providing Track Information

As you will see, the default name for your files has been generated with the format of - Title 01 etc...

You may edit these names, simply by clicking the field and changing the name else.

6. Ready to Rip

OK, we are ready to go.

Press the Start Ripping button to begin the process -

The encoding process and will report the progress on the current process

jestware4.jpg

You may abort the encoding process at any time, by pressing the Abort button, t his will stop the encoding process.

DVD to PSP

Link to comment
Share on other sites

When PSP crash into your digital life,do you have problems of ripping DVD movies to PSP with good video and audio quality? iSkysoft DVD to PSP Converter can easily solve the problem with just a few simple clicks. To rip your DVD with iSkysoft DVD to PSP Converter, you can just following the steps below:

Step 1: Download iSkysoft DVD to PSP Converter and install the program.

sreenshot.jpg

Click the Load DVD button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, select the VIDEO_TS folder and click OK.

Or, click the Load IFO button, browse your computer, find the DVD folder of the movie you want to add from your hard disc or DVD-ROM, open your DVD folder, open the VIDEO_TS folder, select all the IFO files and click OK.

After you add your movie, you can choose any titles or chapters that you want to convert by ticking the check boxes before them.

Step 2: Output Settings

output.jpg

At the bottom of the main window, you can name the output file for the current title/chapter, and select a subtitle to put on your movie, select an audio track. Then finish all the settings including selecting an output format, clicking the Settings button to set the video and audio encoding settings, choose if to merge the selected titles or chapters into one file, and set an output directory to save the output files.

Step 3: Start Conversion

After setting the output settings, you can just click the Convert button to start converting your Movie. You can choose to shut down your computer or open the output folder after conversion so you don’t have to sit before your computer waiting for the conversion to finish.

Advanced Options

If you want to edit your movie before converting it, iSkysoft DVD to PSP Converter for Windows provides your with various powerful functions including:

1. Trim DVD Title or Chapter

If you want to capture a clip from the current title/chapter, you can click the Trim button to open the Trim window and trim the current title or chapter by dragging the Start Time slider to set the start time, and dragging the End Time slider to set the finish time.

trim.jpg

2. Crop DVD Video

If you want to remove the black edges or just convert an area from your movie video, you can click the Crop button to crop the video of the current title or chapter. You can specify an area

either by dragging the frame around the video or setting the crop values: Top, Button, Left and Right.

crop.jpg

3. Video Effect

If you want to adjust the video effect of your movie, you can click the Effect button and drag each effect adjustment slider to set the video brightness, contrast, saturation and video volume. You can also choose a special effect from the Effect drop-down list to apply to your movie.

effect.jpg

DVD to PSP

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Privacy Policy