FW pro DVD-RW

[Vinie]

Pořídil jsem iHAS224 s ix burner max a vypaluji na verbatim mkm-003 rychlostí 2,4. Jaké mám použít nastavení v imgburn? OPC mám vypnuté. Jak je to s force hyper tuningem, online hyper tuningem, smartburn, overspeed a buffer?

[aira]

zdravim, daji se LabelTag a LightScribe vyuzit i u xbox her?

[ivan360]

DVD+R DL 8x made in Singapore, iHase124B CFW, OPC, 4x

instalováno na HDD Xbox360 FAT LT+3 - vše ok

Než budete psát, že Vám něco nejde, tak si 10000x ověřte, že dodržujete správný postup, nastavení, správná média.

Přikládám Log z ImgBurn

I 08:29:42 ImgBurn Version 2.5.6.0 started!I 08:29:42 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 08:29:42 Total Physical Memory: 8 293 820 KB  -  Available: 4 733 396 KB
W 08:29:42 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 08:29:42 Initialising SPTI...
I 08:29:42 Searching for SCSI / ATAPI devices...
I 08:29:42 -> Drive 1 - Info: ATAPI iHAS124   B AL0S (E:) (ATAPI)
I 08:29:42 -> Drive 2 - Info: GZA 2BSDYF4DQ 1.04 (J:) (SCSI)
I 08:29:42 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 08:30:32 Operation Started!
I 08:30:32 Source File: X:\XXXXXXXX\XXXXXXXXXXXXXXXXXXXXXXX.dvd
I 08:30:32 Source File Sectors: 4 267 015 (MODE1/2048)
I 08:30:32 Source File Size: 8 738 846 720 bytes
I 08:30:32 Source File Volume Identifier: DVD_ROM
I 08:30:32 Source File Volume Set Identifier: ea214000MS UDFBridge
I 08:30:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 08:30:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 08:30:32 Source File File System(s): ISO9660; UDF (1.50)
I 08:30:32 Destination Device: [0:1:0] ATAPI iHAS124   B AL0S (E:) (ATAPI)
I 08:30:32 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 08:30:32 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x
I 08:30:32 Destination Media Sectors: 4 267 040
I 08:30:32 Write Mode: DVD
I 08:30:32 Write Type: DAO
I 08:30:32 Write Speed: 4x
I 08:30:32 Link Size: Auto
I 08:30:32 Lock Volume: Yes
I 08:30:32 Test Mode: No
I 08:30:32 OPC: Yes
I 08:30:32 BURN-Proof: Enabled
I 08:30:32 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)
I 08:30:32 Book Type Setting: DVD-ROM
I 08:30:32 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 08:31:05 Optimal L0 Data Zone Capacity: 2 133 520
I 08:31:05 Optimal L0 Data Zone Method: Copied From Original Disc
I 08:31:05 Set L0 Data Zone Capacity Succeeded!
I 08:31:05 Filling Buffer... (40 MB)
I 08:31:06 Writing LeadIn...
I 08:31:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 08:31:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 08:31:09 Writing Layer 0... (LBA: 0 - 2133519)
I 08:44:22 Writing Layer 1... (LBA: 2133520 - 4267014)
I 08:57:45 Synchronising Cache...
I 08:58:11 Closing Track...
I 08:58:12 Finalising Disc...
I 08:58:46 Exporting Graph Data...
I 08:58:46 Graph Data File: X:\XXXXXXXX\ATAPI_iHAS124_B_AL0S_10-LEDEN-2012_8-30_MKM-003-00_4x.ibg
I 08:58:46 Export Successfully Completed!
I 08:58:46 Operation Successfully Completed! - Duration: 00:28:13
I 08:58:46 Average Write Rate: 5 347 KB/s (3.9x) - Maximum Write Rate: 5 634 KB/s (4.1x)
I 08:58:46 Cycling Tray before Verify...
W 08:58:53 Waiting for device to become ready...
I 08:59:08 Device Ready!
I 08:59:09 Operation Started!
I 08:59:09 Source Device: [0:1:0] ATAPI iHAS124   B AL0S (E:) (ATAPI)
I 08:59:09 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 08:59:09 Source Media Supported Write Speeds: 2,4x; 4x; 6x; 8x
I 08:59:09 Image File: X:\XXXXXXXX\XXXXXXXXXXXXXXXXXXXXXXX.dvd
I 08:59:09 Image File Sectors: 4 267 015 (MODE1/2048)
I 08:59:09 Image File Size: 8 738 846 720 bytes
I 08:59:09 Image File Volume Identifier: DVD_ROM
I 08:59:09 Image File Volume Set Identifier: ea214000MS UDFBridge
I 08:59:09 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 08:59:09 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 08:59:09 Image File File System(s): ISO9660; UDF (1.50)
I 08:59:09 Read Speed (Data/Audio): MAX / MAX
I 08:59:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 08:59:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 08:59:10 Verifying Layer 0... (LBA: 0 - 2133519)
I 09:08:24 Verifying Layer 1... (LBA: 2133520 - 4267014)
I 09:17:36 Exporting Graph Data...
I 09:17:36 Graph Data File: X:\XXXXXXXX\ATAPI_iHAS124_B_AL0S_10-LEDEN-2012_8-30_MKM-003-00_4x.ibg
I 09:17:36 Export Successfully Completed!
I 09:17:36 Operation Successfully Completed! - Duration: 00:18:26
I 09:17:36 Average Verify Rate: 7 730 KB/s (5.6x) - Maximum Verify Rate: 11 258 KB/s (8.1x)

[djlevi]

Trochu poznatku ohledne zaloh XGD3.

Vyzkouseno na ctyrech kusech lite on 124 B.A na laborovani padlo asi 30 ks medii verbatim 8x speed

V kazdem pripade navod co je zde k dispozici je v poradku,ale palenim na rychlost 4x bych ani trochu nedoporucoval u hry Forza 4...tam palit jedine 2.4x s vypnutym OPC...nevim proc ale rychleji pokud se palilo..hra se pri intalaci sekla vzdy v 47 procentech a nesla dal instalovat....z disku vsak jde hrat normalne.

Druha moznost je,ze pokud se nekomu nedari stale udelat kopii takovou,aby sla ulozit na hdd v xboxu,tak vypalit hru v image burn jako TRUNCATE...z teto to nainstalovat na hdd v xboxu a pak hrat z dvd,ktere je palene upravenem firmwarem,ale nejde z ni instalovat vice jak 47 procent.Jde zrejme asi o to,ze v tech konecnych datech na dvd ma microsoft asi nejake autorizacniu kody,ktere se funkci TRUNCATE logicky nevypali.Tudiz je potreba ke kazde hre XGD3 pokud se nekomu nedari mit potreba dve dvd..1 instalacni...2 autorizacni.Urcite vite jak to myslim :-)

Tod me poznatky....stopro overene :-)

[Riddick500]

Nevím mno já mám asi 5 Her vypáleno na 4x a instalace u všech na 100% u forzy nevím tu jsem ještě nezkoušel:)

[midar23]

Porasi nekdo?? uz tri hry mam vypalene na 100%, dam do xboxu a instaluji tam je to taky vporadku nainstalovano na 100% ale hry se rozjedou a hned seknou ze neni podporovano.. Mam flash LT 3

[Riddick500]

projel si je v novem Abgx:)?